IRATA Level 2 Rope Access

Continuation course for rope access technicians

This course is for candidates who already have an IRATA level 1 qualification. A level 2 rope access technician shall be capable of rigging working ropes, undertake rescues and performing rope access tasks (under the supervision of an IRATA level 3 rope access technician. You should have some knowledge of legislation, safety requirements and quality assurance procedures relating to rope access.

Level 2 Syllabus Content

Theoretical Knowledge

  • Relevant legislation, guidelines and standard
  • Risk assessments and safety method statement
  • Permit to work systems and exclusion zones
  • Working practices and worksite organization
  • Categories of personal protective equipment (PPE)
  • Equipment selection, use and maintenance, pre use checks and inspection
  • Anchor types and systems
  • Fall factors
  • Suspension intolerance and casualty management
  • Tensioned lines
  • Work restraint
  • Horizontal lifelines
  • Anchorage selection
  • Team work
  • Communication


Equipment and Rigging

  • Assembly and fitting of personal equipment
  • Pre use check of equipment
  • Use of back-up device
  • Tying, dressing and setting of appropriate knots
  • Rigging a basic anchor system
  • Rigging a small Y hang
  • Awareness of rope and sling protection in rigging
  • Wide Y hang
  • Re-belay
  • Deviations
  • Rope and sling protection
  • Pull-through
  • Work restraint and horizontal lifelines
  • Tensioned ropes



  • Descent, Ascent and changeovers
  • Passing deviations
  • Passing a re-belay
  • Passing Knots
  • Rope-to-rope transfer


  • Passing an edge or obstruction and passing mid rope protection
  • Climbing with cow’s-tails
  • Climbing with fall arrest lanyards
  • Using a work seat



  • Rescue a casualty in descent
  • Rescue from ascent mode
  • Rescue from an aid-climb situation
  • Rescue past a small re-belay
  • Rescue past a deviation


  • Rescue from a mid-rope transfer
  • Haul and lower from a platform
  • Hanging haul
  • Cross haul


Course Overview

  • Duration: 5 working days (Monday-Friday)
  • Maximum class size: 6
  • Location: Wood Group, Crofton Road, Stockton-on-Tees
  • Cost: £500 (excl. VAT)
  • Assessment: Independent assessor will assess on written and practical examination
  • Revalidation Period: Certification is valid for 3 years

Level 1 IRATA - Request Information Form

1 + 5 =

Minimum Requirements

  • IRATA qualified level 1 rope access technician
  • Minimum of 12 months and 1000 hours of work experience (hours to be verified by an IRATA logbook and signed by an IRATA level 3 supervisor)
  • Candidates need to be physically fit and free from any disability or medical condition that may prevent them from working safely



Contact us

Wood Group Rope Access Training
Crofton Road

Stockton on Tees
TS18 2QZ

Tel: 01642 603706


Wood Group Industrial Services Limited Main Office, Kirkstone House, St Omers Road, Western Riverside Route, Gateshead, Tyne and Wear, NE11 9EZ Tel: 0191 493 2600 Fax: 0191 493 2601 2018© Wood Group Industrial  Services Limited, Company Registration No.05159696. Registered Office: Compass Point, 79-87 Kingston Rd, Staines, Middlesex, TW18 1DT. Operating as part of John Wood Group Plc Scotland Registration No. SC036219. Registered Office: 15 Justice Mill Lane, Aberdeen, AB11 6EQ, United Kingdom Site Map | Privacy Statement and Terms of Use

Lets get social